Updated Nov 19, 2026· 8 min read

Key takeaways

  • Compare the best ironing board covers by board size, padding thickness and surface coating, from heat reflective silicone picks to thick cotton covers.

The best ironing board cover for most homes is a padded cotton or silicone coated cover cut to the exact length and width of the board, with an elastic or drawstring edge plus underside straps to hold it flat. For a standard 15 by 54 inch board, the Gorilla Grip Original cover and pad pairs a heat reflective silicone surface with thick padding, while the Whitmor Deluxe cover and pad covers the same board size at a budget tier with a 6 millimeter fiber pad. Size comes first: a cover that is even an inch too narrow will creep and bunch no matter how good the coating is.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

  • How to Choose an Ironing Board Cover
    1. Gorilla Grip The Original Ironing Board Cover and Pad
    1. TIVIT Alumitek Pro Ironing Board Cover
    1. Brabantia Ironing Board Cover, Size B
    1. Whitmor Deluxe Ironing Board Cover and Pad
    1. Simplify Silicone Coated Ironing Board Cover
  • Frequently Asked Questions
  • Conclusion
  • Product and ASIN Reference

How to Choose an Ironing Board Cover

Measure the board before ordering anything. Length and width are printed on most listings, and the common board sizes are 13 by 43 inches, 15 by 54 inches for a standard board, and 18 by 49 inches for a wide board. Brabantia uses its own letter sizing, so a Brabantia Size B cover fits Brabantia boards at 49 by 15 inches and is not a universal fit.

Padding thickness decides how much of the metal board shows through. A thin cover over a mesh top board can press a grid pattern into light fabrics, while a pad of 4 to 6 millimeters, or a layered foam and felt build, keeps the surface even. Foam compresses over time, fiber pads hold loft well, and felt layers add density without much bulk.

The surface coating is the second big choice. Plain cotton grips fabric and lets steam pass through freely, which suits heavy steam use. Silicone coated and metallised covers reflect heat back into the garment, resist scorch marks, and wipe clean, though they let less steam escape through the board. Heat ratings on coated covers are published by the maker, with 400 degrees Fahrenheit a common figure.

Fit hardware matters as much as the fabric. Elastic edges are quick to pull on, drawstring and cord fastener systems snug down tighter, and hook and loop straps under the board stop the cover sliding toward the nose while you press. A tailored nose pocket also helps the cover sit flat at the pointed end.

Care and replacement timing round out the choice. Cotton covers can usually go in the wash, while coated covers are normally spot clean only, since laundering can crack the reflective layer. Any cover will thin with heat over time, so plan on replacing it once the padding compresses, the coating flakes, or scorch marks build up in the middle of the board. A fresh pad under an older cotton cover is another option, since separate felt pads are sold on their own and can restore the surface without replacing the whole set.

1. Gorilla Grip The Original Ironing Board Cover and Pad

Gorilla Grip builds this cover around a silicone coated surface that reflects heat back into the garment instead of absorbing it into the pad. The maker rates the coating as heat and scorch resistant to 400 degrees Fahrenheit, and the padding underneath is a thick layer intended to keep the board mesh from printing through onto shirts and linens. It is the premium pick here for anyone who irons often and wants a coated surface with a secure fit.

Fit is handled two ways: an elastic bungee style edge pulls the cover tight around the board rim, and two hook and loop fastener straps run underneath to anchor it. The cover is cut for standard boards at 15 by 54 inches, and the same design is also sold in 18 by 49 inch and 13 by 43 inch sizes for wide and compact boards. Color options include Silver, Sage, Blue and Linen.

Specs

  • Brand: Gorilla Grip
  • Size: 15 x 54 in (also 18 x 49 in and 13 x 43 in)
  • Surface: Silicone coated, heat reflective
  • Heat rating: Scorch resistant to 400 degrees Fahrenheit
  • Padding: Thick padded layer
  • Fit: Bungee edge with 2 hook and loop fastener straps
  • Care: Spot clean

2. TIVIT Alumitek Pro Ironing Board Cover

Check price on Amazon

The TIVIT Alumitek Pro is made in Italy and uses a four layer construction: an AlumiTek coated top layer that blends aluminum and silicone, a foam inner layer, and a felt padded bottom layer. The coated face is designed to reflect heat for faster pressing while resisting scorch and stain marks, and the layered pad gives a firm, even surface that suits dress shirts and trousers.

An adjustable pull bungee cord runs around the edge and works with three fasteners to keep the cover tensioned, which helps on boards that see daily use. It fits standard 15 by 54 inch boards. Buyers who run a steam generator at high output may still prefer plain cotton, since coated covers pass less steam through the board, but for a conventional steam iron this is a durable mid-range to premium option. The layered build also resists the dents and ridges that thinner single layer pads develop over a mesh board top, so the pressing surface stays flat for longer between replacements.

Specs

  • Brand: TIVIT
  • Size: 15 x 54 in
  • Surface: AlumiTek aluminum and silicone coating
  • Construction: 4 layers with foam and felt padding
  • Origin: Made in Italy
  • Fit: Adjustable pull bungee cord with 3 fasteners
  • Properties: Scorch and stain resistant

3. Brabantia Ironing Board Cover, Size B

Check price on Amazon

Brabantia sells replacement covers matched to its own board sizes, and the Size B cover fits Brabantia boards measuring 49 by 15 inches (124 by 38 centimeters). The top layer is 100 percent cotton over a 2 millimeter foam layer, a slimmer pad than the others here, which keeps the board light and the surface firm. Cotton lets steam pass through freely, so this cover pairs well with steam irons and steam stations.

The fit system uses a cord fastener combined with a stretch system that pulls the cover drum tight, and the cotton is colorfast so the pattern holds up to heat and washing. Because the sizing is brand specific, measure a non-Brabantia board carefully before choosing this one; the same cover line also comes in sizes for the wider C boards and the larger D Titan Oval boards.

Specs

  • Brand: Brabantia
  • Size: 49 x 15 in (124 x 38 cm), Size B
  • Surface: 100 percent cotton
  • Padding: 2 mm foam layer
  • Fit: Cord fastener with stretch system
  • Properties: Colorfast, steam permeable

4. Whitmor Deluxe Ironing Board Cover and Pad

Check price on Amazon

Whitmor is the budget tier staple in this category, and the Deluxe cover and pad stands out for its pad thickness at this level: a 6 millimeter fiber pad, as thick as many covers in higher tiers, under a scorch resistant woven cotton surface. That padding is the main reason to pick it, since it stops the board mesh from marking lightweight fabrics.

The cover fits standard 15 by 54 inch boards and comes in a range of prints, including Modern Blocks and Medallion Grey, plus solid colors. The tailored fit uses a nose pocket and an elasticized binding to hold the cover in place. It is a plain, washable workhorse cover for a second board, a laundry room refresh, or anyone replacing a worn cover without moving up a tier.

Specs

  • Brand: Whitmor
  • Model: 6614-833 (Modern Blocks)
  • Size: 15 x 54 in
  • Surface: Scorch resistant woven cotton
  • Padding: 6 mm fiber pad
  • Fit: Nose pocket with elasticized binding
  • Designs: Modern Blocks, Medallion Grey and other prints

5. Simplify Silicone Coated Ironing Board Cover

Check price on Amazon

The Simplify cover, sold under the Kennedy Home Collection line, is a silicone coated padded cover for standard 15 by 54 inch boards. The specialized silicone surface resists staining and scorching and helps garments keep from sticking to the board while you press, which is handy for synthetics and dark fabrics that show shine marks.

Elastic edges stretch over the board rim for a quick swap, and a hook and loop strap underneath adds hold so the cover does not walk toward the nose mid session. Padding under the coating cushions the board surface. It sits in the budget to mid-range tier and is a sensible pick for a household that wants a coated, wipe clean surface without moving to a premium brand.

Specs

  • Brand: Simplify (Kennedy Home Collection)
  • Size: 15 x 54 in
  • Surface: Silicone coated, scorch resistant
  • Padding: Padded cover
  • Fit: Elastic edges with hook and loop strap
  • Properties: Stain resistant, non-stick glide surface

Frequently Asked Questions

What size ironing board cover do I need?

Measure the board top at its widest and longest points and match those numbers to the listing. Standard boards take a 15 by 54 inch cover, wide boards take 18 by 49 inches, and compact boards take 13 by 43 inches. Brand sized covers such as Brabantia Size B fit that brand of board, so check the centimeter measurements before ordering.

Is a silicone coated cover better than plain cotton?

Each suits a different routine. A silicone coated cover reflects heat back into the garment, resists scorch and stain marks, and wipes clean, which speeds up everyday pressing. Plain cotton lets steam pass through the board freely and grips fabric so it does not slide, which heavy steam users and quilters often prefer.

How thick should the padding under a cover be?

A pad between 4 and 6 millimeters, or a layered foam and felt build of similar depth, keeps the board mesh from printing onto fabric and gives the iron a firm surface. Very thin pads around 2 millimeters feel crisp and light but show the board pattern sooner on thin garments, so add a separate felt pad under them if needed.

How do I keep a new cover from slipping while I iron?

Pull the elastic or cord edge fully over the board rim, fasten every underside strap, and then smooth the cover from the nose toward the wide end. Covers with a nose pocket and two or more hook and loop straps hold best. A cover that still moves is usually a size too large for the board.

Conclusion

Match the cover to the board first and the choice gets simple. For a coated, heat reflective surface on a standard board, the Gorilla Grip Original and the TIVIT Alumitek Pro lead this list, with the Simplify cover offering the same coated idea at a lower tier. Cotton loyalists are served by the Brabantia Size B for Brabantia boards and by the Whitmor Deluxe, whose 6 millimeter fiber pad makes it the value pick for standard 15 by 54 inch boards. Any of the five will press better than a worn, thin cover, and each one lists its exact size, padding and fit system so you can confirm the match before ordering.

A
admin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Ironing Board Covers: 5 Padded Picks for…Check price on Amazon